Download QCN File For Xiaomi Mi 9 SE Repair IMEI & Unknown Baseband free by jonaki telecom

Download QCN File For Xiaomi Mi 9 SE Repair IMEI & Unknown Baseband free by Jonaki telecom

Mi 9 SE QCN file download from here. If you are the owner of Xiaomi Mi 9 SE Qualcomm android smartphone and now getting any null IMEI or unknown baseband error then you have to repair Xiaomi Mi 9 SE IMEI. Otherwise, it will show no network in your device and you can’t make a call from your device.

To fix invalid IMEI on Xiaomi Mi 9 SE, we are adding the working QCN file for Mi 9 SE with the IMEI repair tutorial. Simply follow the tutorial as it is as shown below and restore original IMEI on Xiaomi Mi 9 SE within few steps. No need to use any professional tool to repair IMEI in Redmi 6 Pro mobile. Let’s see “how to solve invalid IMEI problem in Redmi 6 Pro without the box?

Xiaomi Mi 9 SE Qcn File For
1. No service problem fix
2. Imei problem fix.
3. Network unlock problem to fix.
4. After flash no service fix.
Download Xiaomi Mi 9 SE QCN File, and Other Files

Xiaomi Mi 9 SE QCN FILE

Xiaomi Mi 9 SE XQCN

TWRP

Magisk – V19

WriteDualIMEI_W_G_eMMC

QPST Tool v2.7.472

USB Driver

Xiaomi Mi 9 SE IMEI Repair Using QCN File
here are so many methods and tools are available to repair IMEI of any Qualcomm devices. But every IMEI repair tool and file depends on their chipset version. At this time, we are talking about Mi 9 SE null IMEI or unknown baseband error only. So if you have the same device with the same issue, just follow the steps properly and restore IMEI on Mi 9 SE mobile.

Xioami Mi 9 SE IMEI Repair Method:
Boot lock must be turned on.
Download the links provided above.
Install the top twrp.
To do this, take the fastboot mode and
fastboot flash recovery on the CMD screen
TWRP will pop up after I have given the top of the magisk i install into memory.
Restart device becomes root.
Then make a backup with qpst and xqcn. To do this, enter the following commands into the CMD screen.

adb shell
su
setprop sys.usb.config diag,adb

Type diagnostics. You need to have Qualcomm USB drivers installed on your computer. You should see the diagnostics port in the device manager.
Open the Qpst program and start the client from the top, then press software download.
Make a backup of xqcn from the Back-Up section. When finished, enter twrp again into the advanced terminal and delete the blocks.

Commands:

dd if=/dev/zero of=/dev/block/sdf6
dd if=/dev/zero of=/dev/block/sdf7
dd if=/dev/zero of=/dev/block/sde33

Reboot.
Then open the device again and turn the diag on again with commands.
Then do IMEI repair with dual writer IMEI program.
Then restore the xqcn backup you received with the Qpst program and restart it.

Good luck.
Things to note Do not reset deleting IMEI if reset with original recovery.
No problems with the update.
Resetting with Twrp will not delete the IMEI.